14 Produkter

per side
Set Descending Direction
  1. Artikkelnummer: BLH9680

    Perfekt for nybegynnere, men alikevell kraftig nok for erfarne piloter. Inductrix FPV+ er neste generasjon av mikro FPV droner. Basert på suksessen med Inductrix kommer denne litt større versjonen med 8mm motorer klar til FPV flyving rett ut av esken. (Radio og FPV briller kommer i tillegg)

    The Blade® Inductrix® FPV + quadcopter is the next generation of micro FPV drones. Building on the success of the Inductrix and Inductrix Pro, this 8mm motor version comes ready to FPV right out of the box with zero fuss. With its integrated camera/video transmitter, Spektrum™ 4.3" monitor with Digital Video Recording, and pre-installed LED tail light, it has everything you need and more for FPV fun. SAFE® technology makes flying simple while the ducted propeller design allows you to bounce off walls and objects without crashing! Innovative Meow Mode™ allows you to flip the quadcopter back upright after a crash by quickly reversing the motor direction. New altitude hold flight mode maintains the distance from the ground, providing an intuitive flight experience.

    Needed to Complete

    5+ Channel Spektrum Transmitter
    Compatible 5.8GHz Video Receiver or Headset

    What's in the box?

    (1) Blade Inductrix FPV + BNF
    (1) EDF Power System
    (1) FPV Camera/Video Transmitter
    (1) 500mAh 1S LiPo Flight Battery
    (1) USB Charger
    (1) User Manual

    Meow Mode
    Innovative Meow Mode™ will flip a crashed, upside down craft to an upright orientation at the push of a button, no more walk of shame! Just like a cat, the Inductrix FPV + will always land on its feet.

    SAFE® Technology

    Angle Mode: Keeps you flying fast and in control with renowned self-leveling
    Altitude Mode: Maintains distance from ground while providing self-leveling, perfect for beginners
    Agility Mode: Freshly tuned agility mode takes full advantage of the 8mm motors, with no self-leveling and full acrobatic capabilities

    Power System

    New power system is fed by a 1S 500mAh that drives new 8mm brushed motors and larger propellers for a much more powerful flight experience. The larger High-Current PH2.0 UM Connector delivers consistent current to motors and electronics for long, reliable flight times form 4-6 minutes.

    Camera & Video Transmitter

    Installed micro FPV camera is now smaller without sacrificing crisp and clear performance. The lightweight combo touts a 32 channel, 25mW video transmitter, a light and durable dipole antenna, and the 600 TVL camera has a 140° field of view.

    NOTE: A HAM license is required to operate the Video Transmitter in the U.S.

    LED Tail Light

    Installed LED tail light provides a vibrant indicator for line of sight flying, or flying with friends. With 5 colors to choose from, simply select which color suits you straight from the sticks on your transmitter.


    Durable airframe and quiet ducted fans protect the motors and propellers from bumps and crashes, while the enclosed canopy fully protects the camera, video transmitter, and flight controller. With the Inductrix FPV +, crashes are stress-free.

    Approximate Assembly Time: No assembly required
    Approximate Flight Time: 4-6 Minutes
    Battery: 500mAh 1S
    Canopy/Body Material: Plastic
    Channels: 5
    Completion Level: Bind-N-Fly
    Flying Weight: 1.83 oz (52g)
    Height: 1.97 in (50mm)
    Length: 3.9 in (100mm)
    Main Blade Material: Plastic
    Main Frame Material: Plastic
    Main Motor Type: Brushed
    Main Rotor Head Type: Multi-Rotor
    Width: 3.9 in (100mm)
    Les mer
    1695 kr
  2. Artikkelnummer: BLH8500DDEMOEX

    Les mer
    1500 kr
    1 På lager
  3. - 26%

    Artikkelnummer: BLH9550EU

    Minidrone i 150 størelse utvilket i sammarbeid mellom Blade og Immersion RC. Blade sin versjon leveres i BNF Basic utførelse. Det vil si at mottaker er inkludert, men radio, batteri, lader, og briller/skjerm kommer i tillegg.
    Dette er EU versjonen og leveres dermed med 25mW videosender.
    Key Features

    Fully assembled and ready-to-race
    Industry leading Spektrum™ 2.4 GHz DSMX® technology
    ImmersionRC F3 Fusion 32-bit flight control system
    Durable airframe with 2mm carbon-fiber motor arms
    Future-proof BetaFlight flight controller firmware (pre-loaded)
    ProTune capability with built-in 2MB black-box recorder
    Full graphic heads-up display with complete on-screen control and telemetry
    Eight 24-bit RGB LEDs and super-loud lost model alarm (installed)
    Integrated 40-channel NexWaveRF 5.8GHz video Tx with Dynamic Power Control
    FatShark 700TVL CMOS v2 FlightCam with tilt adjustment

    Needed To Complete

    A full-range 5+ channel, multi-function transmitter with Spektrum™ 2.4GHz DSMX® technology
    Fat Shark 5.8GHz compatible FPV headset and/or FPV monitor
    3S-4S 500mAh (recommended) or 800mAh (capable) Li-Po Flight Battery
    Suitable Li-Po battery charger

    What's in the box?

    (1) Vortex 150 BNF Basic
    (1) User manual


    The Blade® brand and ImmersionRC have teamed up to deliver the cutting-edge Vortex 150 FPV racer with Spektrum™ technology. It's fully integrated, tuned and equipped so you can be competitive in a matter of minutes. Race-seasoned pilots can take advantage of a custom power system, cutting-edge 32-bit processing power and full-graphic jet fighter inspired OSD. Plus, there's a programmable LED system you can customize to flash at the competition. Perfect for smaller courses or exploring the backyard or abandoned building, it's durable and fun to fly.

    Fully Integrated

    Fully integrated into this machine is the flight controller, full-graphic OSD, BlackBox recorder, 40-channel video transmitter and a dampened flight camera. Loose wiring in the Vortex 150 Pro is virtually nonexistent for a professional look that's easy to maintain.

    Seven 32-Bit ARM Processors

    Not many mini-quads out there like the Vortex 150 racer can claim the cutting edge support of seven, fully integrated 32-bit ARM processors. There's a dedicated ARM for the flight controller, another for the full-graphic OSD, another just for the programmable LED board at the back of the quad and one ARM for each of the four custom high performance ESCs.

    Tough Construction

    Built to survive attempts at cutting down virtually anything in its path, the Vortex 150 is built to take a hit and keep on ticking!

    Fusion F3 with CleanFlight

    The highly integrated Fusion F3 flight controller is equipped with CleanFlight firmware pre-loaded and a 32-bit processor for an out-of the- box control feel that seems almost intuitive. Plus, the software is future-proof with supporting updates easily uploaded via the robust USB port through-hole

    Dynamic Power Control

    The Dynamic Power Control function of the video transmitter lowers power automatically when the Vortex 150 is disarmed or ready for a race to start so that interference from other racers on the line is minimized.

    Wireless Video Control

    NexWaveRF 5.8 GHz video transmitter technology includes 40 channels of support so that it's compatible with any 5.8 GHz A/V headset on the market. The integrated RaceBand system allows up to eight pilots to fly together and is controlled via the OSD so choosing the clearest channel is all done through the RC transmitter.


    The preloaded firmware has been ProTuned to make this quad fly like its on rails. You can explore other ProTune uploads and try out what some of the biggest names in FPV quad racing have shared so that the Vortex 150 Pro can fit your exact performance needs.

    Bright LEDs and Lost Model Alarm

    A set of eight 24-bit RGB LEDs is protected between the upper and lower frames on the tail end. Through a dedicated 32-bit ARM processor, users can program a favorite color, brake lights, turn indicators or just about anything your imagination can conjure.

    Find it, Fast!

    Integrated into the Vortex 150 is a lost model beeper that's loud enough to be coined “ear piercing.” So if you ever cut loose, the ease of finding your Vortex 150 will help you get back into the game fast.

    Custom ESCs with OneShot125

    The custom ESCs have a 22-amp peak, fast OneShot125 communication protocol and regenerative braking for response that's cutting-edge. Each ESC has its own 32-bit ARM processor for the processing power to sustain intense maneuvering. Special rotorSENSE support means that the motor direction is simply programmed with the flick of a finger.

    Custom V-Spec Motors

    The custom high-speed V-Spec 1304 brushless outrunner motors feature a high-speed rating and spin 3" propellers for the punch to accelerate quickly and conquer the most demanding race courses.

    BlackBox Recorder

    Two megabytes of flash memory has been integrated for BlackBox flight log storage. This powerful capability combines the high-speed data in a way that makes tweaking PIDs (proportional-integral-derivative) to a very specific stabilization need simple.

    Full Graphic Display with EzOSD

    The full-graphic On Screen Display (OSD) on-board provides in-flight updates of critical parameters. The EzOSD menu allows all options to be programmed in the field using the RC transmitter and a headset or monitor. Several OSD layouts are included. A real-time interface with the flight controller enables artificial horizons, fighter-jet style displays and an exchange of flight parameters. All OSD layouts include screen-center alerts for critical warnings such as battery voltage, EzUHF Link Critical and more.

    Bind-N-Fly® Completion

    Now it's possible to start enjoying high-performance racing virtually the moment you open the box. Just charge the battery, bind the model to your Spektrum™ DSMX® technology compatible transmitter and fly.

    Approximate Assembly Time: No assembly required
    Approximate Flight Time: Highly dependent upon battery and flying style
    Charger: AC/DC 3S–4S Li-Po balance charger (required)
    Completion Level: Bind-N-Fly Basic
    Display: Full-graphic with multiple layout options
    Height: 35mm
    Length: 147mm
    Main Frame Material: Carbon Fiber
    Main Motor Type: Brushless
    Motor Size: Custom V-Spec 1304-3200Kv
    Propeller Size: 3”
    Recommended Motor Battery: 500mAh 3s–4s Li-Po (recommended) / 850mAh 3s-4s Li-Po (capable)
    Rotor Type: Quadcopter
    Size/Scale: 150
    Weight: 260g with battery
    Width: 140mm
    Les mer
    Spesialpris 2499 kr Vanlig pris 3395 kr
    2 På lager
  4. Artikkelnummer: BLH8580G

    Nu slipper du köpa komponenter från en massa olika leverantörer för att bygga din Micro FPV maskin! BLADE presenterar här den nya INDUCTRIX FPV i BnF-utgave. Det innebär en komplett modell med inbyggt FPV-kamera + VTX (5,8gHz videosändare) samt USB-laddare och ett kraftigt batteri på 200 mAh med 45C strömtålighet! Du kompletterar själv med FPV briller eller FPV montior och din SPEKTRUM-sändare. Här kommer allt i en låda från Horizon Hobby! Jämfört med "gamla" Inductrix är denna version utrustad med nytt kontrollkort, större batteri samt vassare motorer!

    Les mer
    899 kr
    2 På lager
  5. Artikkelnummer: BLH8570EU

    Les mer
    1199 kr
    1 På lager
  6. Artikkelnummer: BLH8500G

    Les mer
    1998 kr
    2 På lager
  7. Artikkelnummer: BLH8700

    Otrolig microdrone från Blade! Detta är RTF-versionen
    Les mer
    599 kr
    1 På lager
  8. Artikkelnummer: BLH9180

    NANO QX med inbyggt FPV-system!
    Les mer
    998 kr
    1 På lager
  9. Artikkelnummer: BLH02150EU

    Quadracer i BNF-utförande!
    Les mer
    3699 kr
    1 På lager
  10. - 18%

    Artikkelnummer: BLH04050EU

    Mini FPV modell med børsteløse motorer. Leveres som BNF Basic.

    Les mer
    Spesialpris 1795 kr Vanlig pris 2195 kr
    3 På lager
  11. Artikkelnummer: BLH7380T2

    Les mer
    499 kr
    1 På lager
  12. Artikkelnummer: BLH7680

    Veldig snill å grei å fly
    Les mer
    859 kr
    1 På lager

14 Produkter

per side
Set Descending Direction